BMW E46 M-Tech Front Splitter

SKU: E46MSPTF

Price:
$299 $379
 10 weekly payments of $29.90 learn more

Australian delivery: 1-7 days | International delivery: 7-10 days
Pickup: we will notify you once your item is ready for collection.

After your order is confirmed, it is hand finished, polished & inspected to ensure you receive the highest quality.

Description

Description:

The Flow Designs splitter set for the BMW E46 M-Tech includes front & side splitters & a pair of rear spats. Increase the aggressive look of your 3-Series E46 with some aero flair! The installation of the splitters to the bumpers is simple, with all instructions provided.


Kit Includes:

  • Splitter 
  • Pre-Mounted Aero Spacers
  • 2 Flow Designs Stickers
  • Fitting kit

Material:

  • 10mm thick polyethylene composite, bevelled edges

Finish:

  • Hand polished satin black
 

Why do we use Polyethylene Composite for Flow Designs Splitters?

Strong, impact resistant, doesn't corrode or chip, and has excellent abrasion resistance (say… from scraping on driveways and road all the time?)

Carbon Fibre is better isn’t it?

As strong and light as Carbon fibre is, it CRACKS on impact or when under load and/or stress. Clear coat will eventually fades & cracks and become undesirable.


Install Instructions (PDF)
                      

How Strong Are Our Splitters?

FAQ

Customer Reviews

Based on 4 reviews
75%
(3)
0%
(0)
25%
(1)
0%
(0)
0%
(0)
M
Michael Soufis
Great quality, average to fit

Looks great on the car, however, the kit seems to be a bit all over the place in terms of fitment. The front bumper sits alright once you take the spacers out if the bumper is non m-tech, the side skirts has a slot to drill where there is no longer space, which we just had to make work, and the rear spats work fine on 1 side, however do not take into account the cutout for the exhaust on the other. Overall kit is good, probably one of the more average kits to what i’ve seen compared to the I30N and Golf kits

J
Jamie Scott

Looks great & decent quality. Also does fit a sedan e46 pretty well

E
Euro
Excellent value for money

This is a great solution for daily driven cars that have to survive harsh realities of the public road. Carbon fibre alternatives are 5x the price but will break the moment they touch the ground. ABS ones are ugly as sin and even more vulnerable than CF is. I can confirm the central 2 bolts had a flaw in the diagram and supplied 40mm bolts were too short for the intended application. Extra tip; people fit these to non M-Technic pre-facelift coupe bumpers too, by removing the two "aerospacers" in the middle it sits flush with the pre-facelift bumper and looks good ;)

E
Evan
Fantastic Splitter for E46 ZHP

Not a lot of splitters out there that fit the m-tech bumper on a non-M E46. This one looked great and was very affordable. Despite coming from Australia it was at my door in the US in less than a week. It’s very strong and so far has held up great. It bolted right up in less than half an hour. The two 40mm bolts for the middle are a little short, but it was easy enough to purchase a few 50mm. Looking forward to adding more Flow Designs kit to my car soon.

Estimate shipping

COMPLETE YOUR SPLITTER KIT

RECENTLY VIEWED

Customer Reviews

Based on 4 reviews
75%
(3)
0%
(0)
25%
(1)
0%
(0)
0%
(0)
M
Michael Soufis
Great quality, average to fit

Looks great on the car, however, the kit seems to be a bit all over the place in terms of fitment. The front bumper sits alright once you take the spacers out if the bumper is non m-tech, the side skirts has a slot to drill where there is no longer space, which we just had to make work, and the rear spats work fine on 1 side, however do not take into account the cutout for the exhaust on the other. Overall kit is good, probably one of the more average kits to what i’ve seen compared to the I30N and Golf kits

J
Jamie Scott

Looks great & decent quality. Also does fit a sedan e46 pretty well

E
Euro
Excellent value for money

This is a great solution for daily driven cars that have to survive harsh realities of the public road. Carbon fibre alternatives are 5x the price but will break the moment they touch the ground. ABS ones are ugly as sin and even more vulnerable than CF is. I can confirm the central 2 bolts had a flaw in the diagram and supplied 40mm bolts were too short for the intended application. Extra tip; people fit these to non M-Technic pre-facelift coupe bumpers too, by removing the two "aerospacers" in the middle it sits flush with the pre-facelift bumper and looks good ;)

E
Evan
Fantastic Splitter for E46 ZHP

Not a lot of splitters out there that fit the m-tech bumper on a non-M E46. This one looked great and was very affordable. Despite coming from Australia it was at my door in the US in less than a week. It’s very strong and so far has held up great. It bolted right up in less than half an hour. The two 40mm bolts for the middle are a little short, but it was easy enough to purchase a few 50mm. Looking forward to adding more Flow Designs kit to my car soon.